The Penn Elcom C1817k cabinet corner has a three-leg design and an 11.3mm internal radius. It's made of 1.2mm-thick steel and comes with three pre-drilled mounting holes - one on each side.
This zinc-coloured Penn Elcom steel ball corner has six pre-drilled holes with a diameter of 5 mm each.
Esta esquina plana Penn Elcom galvanizada tiene tres orificios preagujereados con un diámetro de 5 mm. Tiene unas mMedidas de 49 x 49 mm, fabricada de metal de 1 mm de grosor.
Si quieres proteger tu flight case de los golpes, puedes utilizar estas esquineras apilables, fácil de colocar gracias a sus cuatro orificios preagujereados.
Esta esquina redondeada Penn Elcom de metal tiene tres orificios preagujereados con un diámetro de 5 mm cada uno. Medidas de 41 x 41 mm y fabricado de metal de 1,2 mm de grosor.
The Penn Elcom B1130-25 brace has a 2mm as well as a 5mm internal radius, making it that bit more flexible. It's made of steel and comes with four 5mm pre-drilled mounting holes.
This black cabinet corner from Penn Elcom protects and reinforces your custom speaker cab or flight case. It's made of steel and has three mounting holes - one per leg.
<p>This rugged flat corner can is ideal for your DIY flight case. It offers optimal protection against hits during transport.</p>
The Penn Elcom B1136z T-Corner Bracket has a 2mm interior radius, has been made from 1.2mm-thick steel and comes pre-drilled with 5mm mounting holes.
The Penn Elcom C1373z neatly combines a ball corner with a corner brace. The model is 67mm long, has a 3mm interior radius and comes pre-drilled with six 5mm mounting holes.
The Penn Elcom B1125z brace is made of 1.2mm-thick steel, has a 2mm internal radius and comes with four 5mm pre-drilled mounting holes.
Busy building a flight case? Be sure to finish it with ball corners such as the Penn Elcom C1351/00/R5z to make it extra strong.
Made of 2mm-thick steel, this Penn Elcom-made ball corner offers solid protection against bumps and knocks. It has a 3mm internal radius and comes with six 5mm pre-drilling mounting holes.
A metal protective corner with pre-drilled holes. This Penn Elcom protective corner has a galvanised finish.
Made from heavy-duty metal, the Penn Elcom B0706n corner bracket features rounded corners and pre-drilled mounting holes.
Designed by Penn Elcom, this brace-and-ball-corner in one is made of steel and comes with a 30mm offset on one leg only, making it a solid piece of hardware for lidmaker extrusions.
This 50mm by 40mm Penn Elcom T-corner bracket comes in a zinc-coloured finish and has been pre-drilled with six 5mm mounting holes to ease installation.
A secure finisher for any heavier self-build flight case, this Penn Elcom ball corner has a 5mm internal radius, is made from 1.8mm-thick steel and has a 30mm offset.
The Penn Elcom B0700z brace is made of 1.2mm-thick steel, has a 1mm internal radius and comes with four 5mm pre-drilled mounting holes.
Esta esquina plana Penn Elcom galvanizada tiene tres orificios preagujereados con un diámetro de 5,5 mm. Tiene unas medidas de 37 x 37 mm, fabricada de metal de 1 mm de grosor.
The Penn Elcom C7079z flat corner has been made from steel, has a 5mm internal radius and comes pre drilled with mounting holes for a neat finish to the corner of a self-build flight case.
Made by Penn Elcom, this solid steel box corner is fully prepped to securely finish off a self-build flight case or speaker cabinet. This edition comes in black.
Esta esquinera se puede colocar fácilmente, por ejemplo, en la esquina de tu caja de herramientas gracias a los cuatro orificios. Se puede apilar.
Designed to meet professional standards, this Penn Elcom ball corner is made from 1.5mm-thick steel, has a 2.5mm internal radius and a three-leg construction, each pre-drilled with two mounting holes.
This zinc-coloured Penn Elcom steel ball corner has three pre-drilled holes with a diameter of 5 mm each. It is 59 x 59 mm in size and is made of 1.5 mm thick steel.
Made from solid steel and pre-drilled with four mounting holes, this Penn Elcom corner bracket is fully compatible with the EG-0500/2 and EG-0521/2 closure profile.
Featuring an interlocking cut-out, this stackable Penn Elcom ball corner helps to ensure secure transportation of your custom flight cases. It's made of steel and comes with three pre-drilled mounting holes.
The Penn Elcom C1364z ball corner has a leg-less design for an extra-direct mount. It's stackable and comes with six pre-drilled mounting holes.
Built to meet professional standards, this Penn Elcom ball corner is made from 1.2mm-thick steel, has an 0.8mm internal radius, has been recessed to fit 30mm profiles and has been designed to finish off flight case lids.
This Penn Elcom-made brace features four pre-drilled mounting holes and has been made of 1.2mm steel. The corners are rounded and the whole thing measures 31.2mm by 40mm.
Made by Penn Elcom, this solid steel box corner is fully prepped to securely finish off a self-build flight case or speaker cabinet. This edition comes in nickel.
This ball corner not only protects against impacts but reinforces your flight case at the same time. It's also easy to mount thanks to the three pre-drilled mounting holes.
The Penn Elcom B1925z brace is made of 1mm-thick steel, has a 1mm internal radius and comes with four 4mm pre-drilled mounting holes.
Made from solid steel and pre-drilled with four mounting holes, this Penn Elcom corner bracket us fully compatible with the EG-0500/2 and EG-0521/2 closure profile.
A secure finisher for any heavier self-build flight case, this Penn Elcom stackable ball corner has an R5 radius, is made from 1.8mm-thick steel and features 30mm profile recesses.
The Penn Elcom B1130-25-HINGE hinged corner brace is a handy two-in-one bit of rack/flight case hardware. It comes with twelve mounting holes and has an internal radius of 2mm in the middle and 5mm near the edges.
The Penn Elcom B1131 brace bracket is made of 1.2mm-thick steel, features six pre-drilled mounting holes and measures 51.5 by 42mm. The internal radius is 1.5mm.
This Penn Elcom ball corner is specifically made for 22mm extrusions. It's made of steel and has a 1.2mm internal radius to offer superb protection for the corners of your case.
This medium steel ball corner from Penn Elcom has two mounting holes per leg, a PennBrite™ finish and a 1.2mm internal radius.
Made from solid steel and featuring recesses for 30mm profiles for a flush finish, this Penn Elcom ball-corner can be installed to protect a hard-working flight case and its contents.
<p>This rugged flat corner fits any 30 x 30 mm angle extrusion.</p>
Featuring a dented point, the Penn Elcom C1935z flat corner is stackable with the C1150z flat corner. This model is made from 1mm-thick steel and features a 4mm internal radius.
The Penn Elcom C1343z ball corner is made of steel, has a 1mm internal radius and is compatible with 22mm extrusions. Install one at every corner of your DIY flight case and be assured of optimum protection.
Esta esquina galvanizada Penn Elcom tiene cuatro orificios preagujereados y dos extremos redondeados. Medidas de 31,2 x 40 mm, fabricada de metal de 1,2 mm.
This Penn Elcom designed flat corner has a 5mm internal radius and comes finished with a foot, making it the ideal finisher for the base of a flight case.
Filtros Filtros