Penn Elcom's L0953N is a robust, lockable steel draw latch that will keep whatever you've got in your flight case safe and secure. The L0953N has 3.5 mm mounting holes.
This medium-sized butterfly latch from Penn Elcom has a 13mm installation depth, is made from heavy-duty steel and is easily secured thanks to the ten-pre-drilled 5mm mounting holes.
This Penn Elcom designed butterfly latch is made of steel and features a zinc finish. Lockable with tie-wraps, this recessed latch can be used to finish a flight case.
Made by Penn Elcom, this locking latch can be installed on a DIY flight case for a secure finish.
This lockable draw latch by Penn Elcom is made of steel and has a chrome finish and 3mm mounting holes.
To open Penn Elcom's MOL3 butterfly latch, all you have to do is twist the automatic positioning latch. This large model has a 16mm deep offset dish as well as no less than fourteen mounting holes to guarantee a secure fit.
The Penn Elcom L2471 slam latch has been purpose-made to finish a Slam Lid system so you can secure a lid to the side of a flight case.
Finish a custom rack or flight case with this Penn Elcom locking latch and be assured of solid security.
Penn Elcom's LE-9284 panel roto lock consists of two separate parts that gradually pull at each other as you rotate the lock. This lock has a high load rating, making it suitable for heavy use.
A big and beefy flight case will need a big and beefy butterfly latch. Made by Penn Elcom, this large butterfly latch doesn't just have a solid look, but has been made from steel for a fully secure finish.
This Penn Elcom butterfly latch can be built in to your flight case. It is made of steel and has a zinc colour. You can also secure the lock with tie-wraps.
The Penn Elcom L905/927 medium butterfly latch is made of steel and features a key lock. It comes in a 13mm-deep dish and is the perfect finishing touch for a secure custom flight case.
This medium-sized butterfly latch is made from steel for a solid and secure finish to a self-build flight case. The professional Penn Elcom L0915k comes pre-drilled with mounting holes.
Small yet mighty, the Penn Elcom L0914z Mini butterfly latch is made from solid 1.5mm-thick steel and comes pre-drilled with 4.2mm mounting holes for easy installation. Ideal for smaller DIY touring cases.
Finish off your self-build flight case with a secure Penn Elcom-made butterfly latch. This medium-format latch is recessed by 10mm.
Finish off your self-build flight case with a secure Penn Elcom-made butterfly latch. This medium-format latch is recessed by 7mm.
<p>This Penn Elcom butterfly lock is provided with 5mm mounting holes and the dish is 15.5 mm deep. The lock is fitted with a kickout spring.</p>
This small Penn Elcom draw bolt is made of steel and has a zinc colour. Easy to mount on to one of your flight case.
Este cierre de mariposa Penn Elcom L907 915z sirve como cierre de una flight case para montar tu mismo.
Comes with an eye that allows you to lock your flight case with a padlock. Equipped with six mounting holes with a diameter of 4.8 mm each.
This black-coated, medium-sized butterfly latch from Penn Elcom has a 13mm installation depth, is made from heavy-duty steel and is easily secured thanks to the ten-pre-drilled 5mm mounting holes.
This steel backplate can be mounted to reinforce a medium-size butterfly latch, which can be a good idea if you're working with relatively thin panels.
Este cierre en forma de mariposa de Penn Elcom es muy resistente y está equipado con un mecanismo que se cierra y se abre simplemente rotando un ala. Sin placa, con una profundidad de 16 mm.
The Penn Elcom L0926-90k 90-degree catch plate is made of steel and is compatible with large Penn Elcom designed butterfly latches.
The Penn Elcom L0737/46 latch has a valance-spanning design and features a 46mm lip and a 10mm recessed dish.
Made of 1.2mm-thick steel, the Penn Elcom latch lock is a great finisher for an ultra-secure self-build flight case. This edition has a 28mm lip.
To complete the L0747 Series latch lock from Penn Elcom and polish off a secure flight case, you'll need to the L0747/CP catch plate.
Made of 1.2mm-thick steel, the Penn Elcom latch lock is a great finisher for an ultra-secure self-build flight case. This edition has a 32mm lip.
The Penn Elcom L0737 overlatch is a solid flight case locking mechanism. It's made of 0.9mm-thick steel, comes with pre-drilled mounting holes and has a 41mm hook length measured from the offset.
The Penn Elcom L0737/64 latch lock comes in a 10mm recessed dish and is made of steel.
When installing one of the latches from the L0737 or L0747 Series from Penn Elcom, it's very likely that you'll need the compatible L0965/CP catch plate. This black finished, pre-drilled plate is made of 1.2mm thick steel.
The Penn Elcom LE-9274 panel lock features a durable latching mechanism and boasts of a high load rating of 1,000kg.
Filtros Filtros