- Inicio /
- Catálogo completo /
- Cables & Tools /
- Cables para iluminación /
- Cables especiales para iluminación
Cables especiales para iluminación
cado
cado
cado
cado
cado
cado
cado
cado
cado
The Showtec LED Control RGB cable can be used to connect your LED spotlights or LED strips. A flexible cable jacket ensures optimal protection. This cable is delivered per metre.
cado
This patch cable ensures a worry-free connection between the LD power adapters and several LD LED fixtures. Create your own LED grid!
Cables from the Cameleon series by Showtec can be used out of doors, but to close off the last connector in a watertight way, you need this End Cap. The power cable is hermetically sealed-off this way.
Increase the distance between your LED Pixel controller and an LED Pixel Tube 360 with this 5-metre extension cable.
This LED Control RGB 2.5mm² cable is available per metre. You can use it for your LED spotlight or LED strip installation.
This practical set of end caps is fit for the connectors of light effects from the Showtec Cameleon series. This Data End Cap Set consists of a male and female unit. Prevent short-circuiting and corrosion with these end caps.
Double the range of your Showtec Cameleon DMX cable by means of this 3-metre extension cable.
This rugged extension cable has an IP65 classification. The cable can be used with the Cameleon series by Showtec. Thanks to the locking connectors, water doesn't stand a chance of getting in at the cable.
In order to be able to use the lighting armatures from the Showtec Cameleon series out of doors, you can use this cable. An IP65 classification indicates that the cable can handle any kind of weather.
Extend the length of your Showtec Cameleon power cable with this 3-metre long extension cable.
This original, 3-metre Showtec Cameleon DMX cable is suited for the lighting series of the same name.
This splitter from Schuko to PowerCon lets you power three lighting armatures simultaneously.
This original, 3-metre Showtec Cameleon power cable is suited for the lighting series of the same name.
This connector is suited for the Eurolite Rubberlight LED flexible light tube and features a plug.
This patch cable is just what you need to connect products from Briteq's LD series. Connect several power supplies and LED fixtures with this CAT-5 cable with RJ45 connectors.
This extension cable allows you to increase the distance between your LED Pixel controller and a Tube 360 with up to 10 metres.
The Powerlink cable was designed to link the LED Power Bank and the LED Power Beam. They come in 1, 5 and 10 metre lengths.
Briteq brings us the LD series, a complete line of products for fixed installation and great LED lighting. This cable connects the feed and the LED fixtures.
The Powerlink cable was designed to link the LED Power Bank and the LED Power Beam. They come in 1, 5 and 10 metre lengths.
This splitter allows you to split the signal for products of Briteq's LD series. They're the perfect way to create a full LED network and to split a signal to a separate group via RJ45 CAT-5 cables.
