<p>The PSM1 is a shockmount for the Rode Procaster and the Podcaster.</p>
<p>The Pivot Adaptor by Rode is a practical adapter that allows you to attune the angle of your microphone clip re the stand. Thanks to the accessory screw thread adapter, the Rode Adaptor fits on nearly any stand.</p>
<p>The WS lavalier is a black windscreen that reduces wind and breathing noise. This windscreen is designed for use with Rode's lavalier mic. The set consists of three black WS lavalier windscreens.</p>
Exclusively designed to fit the compact Rode VideoMic Go microphone, the Rode DeadCat Go windshield has been made from faux-fur to keep wind noise out of the recording, resulting in clean and clear sound when shooting outdoors.
<p>Rode's SM6 is a shockmount and pop shield in one. It is not only suited for Rode microphones, it also fits other brands.</p>
The Rode SM4-R suspension shock mount has dual Rycote Lyre mounts so you can position your microphone to perfection on a boom pole or mic stand.
The DeadCat VMPR windshield by Rode enables you to make even better, cleaner audio recordings with your Videomic Pro Rycote.
The Rode WS11 Windshield has been exclusively designed to fit the VideoMic NTG camera microphone and has been made from faux-fur, making it far more effective than standard foam.
<p>If you are creating recordings with your Rode Blimp microphone, you need as transparent a sound as possible. The Rode Dead Wombat keeps wind out of your recordings.</p>
With the complete Rode Colors 3 Colour-Coding Pack, you can colour code the Wireless Go II and Lavalier II systems and always know exactly which transmitter is linked to which receiver.
While the foam windshield that came included with your Rode VideoMic Go II will protect your recordings from a light breeze, if you're working outdoors on location, you'll definitely need something more hefty, like the made-to-measure WS12.
Slotted over the Rode Videomicro or Videomic ME microphone, the Rode WS9 windshield efficiently counters wind noise, resulting in clean recordings - even on outdoor locations.
This set of two Rode WS-Chroma windshields have been colour-coded in blue and green and designed to fit the Rode VideoMic NTG. Use one of these windshields in front of a green or blue screen to easily remove them from the shot later.
The Rode WS14 pop filter has been purpose-designed for the Rode PodMic and PodMic USB and counters the noise caused by plosives like Ps and Fs.
The Rode WS14 pop filter has been exclusively designed to fit both the Rode PodMic and PodMic USB. Slot it over the grille, counter vocal plosives like 'P' and 'F' and gain clean sound.
La montura antivibratoria Røde SMR Premium es muy resistente, digna de los micrófonos más valiosos. Está hecha de polímero de calidad militar. Sistema Rycote Lyra doble para el amortiguamiento. Filtro anti pop metálico.
Use the Rode Interview GO hand grip to turn your Wireless Go lavalier into a handheld microphone and get it ready for interviews! Foam-rubber wind shield included.
La nueva versión mejorada del galardonado Blimp de Rode elimina el ruido del viento, para los micrófonos tipo cañón NTG1, NTG2 y NTG3 de Rode. Con montura antivibratoria mejorada (Lyre de Rycote) y funda forrada.
Everyone knows you can't just plug a lavalier or headset microphone into the XLR mic input of a mixer or audio interface and expect it to work. First, you need the Rode VXLR Pro: a stereo mini-jack to XLR adapter with built-in phantom power conversion.
Rode's PG2-R is a pistol grip shock mount designed to keep contact sound and unwanted vibrations to a minimum. It's fitted with the Rycote Lyre shock mount system.
Rode NT-USB Microphone Pop Filter
<p>Do you ever make outdoor recordings under difficult circumstances? In that case, you should use this Rode WS8 Deluxe Windshield to prevent wind noise from being picked up.</p>
Rode SM2 shock Mount for the Rode NT2A, NTK, K2, NT1000, NT2000 and the Classic 2.
<p>The WS6 windshield is fit for the Rode NTG1 and NTG2 microphones. Thanks to the thick filling, the WS6 is fit for use in windy situations - it ensures that you are intelligible by keeping wind noise out.</p>
The NT45-O is a interchangeable omni capsule for the NT5, NT55 and NT6 microphones. Its omnidirectional pickup pattern is designed for equal sensitivity at all sides of the capsule, to allow for the recording of more 'room'.
The Minifur-LAV windshields are delivered in a set of 3 and are made for Rode’s Lavalier tie-clip microphone.
The Rode SM3-R is equipped with an improved suspension, compared to its predecessor, the Rycote Lyre, which prevents vibrations and contract sounds from disrupting your audio.
Upgrade your field kit with the Røde LB-1 rechargeable battery and set yourself up with up to 10 hours of additional battery life for your Performer TX-M2 and up to 100 hours of continuous power supply for VideoMic Pro+.
Specifically designed for Røde's popular VideoMic Pro+, the DeadCat VMP+ is a highly effective, easy-to-install windshield.
The Rode Thread Adapter actually combines three screw thread adapters into one. Fit it to your camera bag or key ring via the carabiner clip and you'll never have to deal with thread-incompatibility issues again.
Make sure you always have the right clip to secure your Rode Wireless Go microphones with the FlexClip Go pack. Includes a MagClip Go, CrossClip and Vampire Clip.
<p>The RM3 microphone holder is specifically designed for the various Rode microphones. It can be used for the M2, M3, NT3 and NT4.</p>
<p>From now on can easily clip on your Rode Lavalier or HS1B. This is an indispensable accessory for every headset microphone user!</p>
<p>The Rode WSVM is used when your recording environment only suffers from a little bit of wind. It is also used to suppress loud sounds in speech.</p>
With the complete Rode Colors 2 Colour-Coding Pack, you can colour code the Wireless Go clip-on microphone system and always know exactly which transmitter is linked to which receiver.
Rode WS3 windshield for the Rode NT3.
<p>The WS-HS1-B set consists of 3 high-quality windscreens for the HS 1B headset microphone by Rode.</p>
<p>The Rode invisiLav is designed to neatly be tucked away, under your clothing, for instance. Its soft construction absorbs vibrations and handling noise.</p>
<p>This cable can be connected to Rode Micon connectors. It is 1.2 metres long.</p>
<p>The compact D-PowerPlug instrument preamplifier provides any dynamic microphone with an electronically balanced preamp. It's ideal for locations without their own preamp.</p>
The Rode Magclip GO offers you an ingenuous way to attach and hide your Wireless GO lavalier microphone behind your lapels. All that remains visible is a sleek, clean-looking magnet.
<p>The Minifur-HS1 windscreen significantly reduces wind and breathing noises. It can be used in combination with the HS 1B or the HS 1P headset microphone.</p>
<p>Rode WS5 windshield for the Rode NT5, NT55 and NT6 microphones.</p>
Filtros Filtros