basado en 3036 reseñas

Lewitt LCT 640 micrófono de condensador de membrana grande

aún no hay comentarios
Lewitt LCT 640 micrófono de condensador de membrana grande

No disponible

Este producto ya no puede adquirirse

Características

Características del producto

Válvulas de micrófono
No
Sustainable product
Not specified
Sensibilidad micrófono (dBV/PA)
-41
Impedancia micrófono
100-149 Ohm
Microphone sound
Clean/neutral
Filtro cutº
Sí
SPL máxima
140 dB - 149 dB
Frecuencia máxima
20 - 20.9 kHz
Accesorios de micrófono
Montura antivibratoria, antivientos, bolsa o estuche, maleta
Frecuencia mínima
20 - 21 Hz
Conmutable
Sí
Pad conmutable
Sí
Patrón de captura
Cardioide, bidireccional, omnidireccional, multipatrón
Estéreo
No
Vintage microphone family
Not applicable

Peso y las dimensiones incluyen el paquete

Peso
430 gr
Dimensiones
158,0 x 5,2 x 3,6 cm

Características del producto

  • acoustic operating principle: pressure gradient transducer, externally polarised
  • diaphragm: 3-micron gold-sputtered
  • transducer: 25.4 mm / 1 inch
  • directional characteristics: omni, cardioid, broad cardioid, super cardioid, and figure 8
  • frequency range: 20 Hz - 20,000 kHz
  • sensitivity: 13 mV / Pa (-38 dBV), cardioid, 10 mV / Pa (-40 dBV), omni, 9 mV / Pa (-41 dBV), figure 8
  • signal/noise ratio: 84 dB-A
  • equivalent noise ratio: 10 dB-A, cardioid (IEC 61672-1), 12 dB-A, omni (IEC 61672-1), 13 dB-A, figure 8 (IEC 61672-1)
  • dynamic range of FET mic amp.: 135 dB-A
  • max. SPL at 0,5 % THD: 145 dB, 0 dB pre-attenuation, 151 dB, 6 dB pre-attenuation, 157 dB, 12 dB pre-attenuation, 163 dB, 18 dB pre-attenuation
  • pre-attenuation pad: 6 dB, 12 dB, switchable
  • bass cut filter slope: 12 dB/octave at 40 Hz, 6 dB/octave at 150 Hz, 6 dB/octave at 300 Hz
  • nominal impedance: < 150 ohms
  • nominal impedance: > 1,000 ohms
  • power supply: 48 V +/- 4 V (IEC 61938)
  • current consumption: 5.5 mA (IEC 61938)

Artículos alternativos

Características

Características del producto

Válvulas de micrófono
No
Sustainable product
Not specified
Sensibilidad micrófono (dBV/PA)
-41
Impedancia micrófono
100-149 Ohm
Microphone sound
Clean/neutral
Filtro cutº
Sí
SPL máxima
140 dB - 149 dB
Frecuencia máxima
20 - 20.9 kHz
Accesorios de micrófono
Montura antivibratoria, antivientos, bolsa o estuche, maleta
Frecuencia mínima
20 - 21 Hz
Conmutable
Sí
Pad conmutable
Sí
Patrón de captura
Cardioide, bidireccional, omnidireccional, multipatrón
Estéreo
No
Vintage microphone family
Not applicable

Peso y las dimensiones incluyen el paquete

Peso
430 gr
Dimensiones
158,0 x 5,2 x 3,6 cm

Características del producto

  • acoustic operating principle: pressure gradient transducer, externally polarised
  • diaphragm: 3-micron gold-sputtered
  • transducer: 25.4 mm / 1 inch
  • directional characteristics: omni, cardioid, broad cardioid, super cardioid, and figure 8
  • frequency range: 20 Hz - 20,000 kHz
  • sensitivity: 13 mV / Pa (-38 dBV), cardioid, 10 mV / Pa (-40 dBV), omni, 9 mV / Pa (-41 dBV), figure 8
  • signal/noise ratio: 84 dB-A
  • equivalent noise ratio: 10 dB-A, cardioid (IEC 61672-1), 12 dB-A, omni (IEC 61672-1), 13 dB-A, figure 8 (IEC 61672-1)
  • dynamic range of FET mic amp.: 135 dB-A
  • max. SPL at 0,5 % THD: 145 dB, 0 dB pre-attenuation, 151 dB, 6 dB pre-attenuation, 157 dB, 12 dB pre-attenuation, 163 dB, 18 dB pre-attenuation
  • pre-attenuation pad: 6 dB, 12 dB, switchable
  • bass cut filter slope: 12 dB/octave at 40 Hz, 6 dB/octave at 150 Hz, 6 dB/octave at 300 Hz
  • nominal impedance: < 150 ohms
  • nominal impedance: > 1,000 ohms
  • power supply: 48 V +/- 4 V (IEC 61938)
  • current consumption: 5.5 mA (IEC 61938)
bax-shop.uk | B-stock

Información del producto

nº de producto: 9000-0020-2694

General

The Austrian-made LCT 640 raises the bar when it comes to large-diaphragm condenser microphones. Once again, this microphone delivers unprecedented performance for the demanding studio engineer. The LCT 640 is best used for lead and backing vocals, and acoustic instruments like piano, guitar, drums, percussion and strings. It's also suitable as overhead microphone for recording electric guitar in the studio as well as on stage.

LCT 640 large-diaphragm tube condenser microphone

In addition to the standard omnidirectional, cardioid and figure 8 pickup patterns, Lewitt's LCT 640 also possesses broad and super cardioid directional characteristics. Furthermore, this mic has a dynamic range of 135 dB and really stands out from the rest thanks to its extremely low self-noise ratio of just 10 dB. In combination with a 4-level hi-pass filter and a 4-step switchable pre-attenuation filter, this mic offers virtually limitless recording possibilities. Automatic muting, key lock to prevent accidental setting changes, clipping protection, push buttons and an illuminated display are all reasons why the LCT 640 is so unique.

The brand Lewitt

This Vienna-based microphone company stands for high-quality mics, designed to reproduce an authentic, pure sound and memorable recordings. Their microphones comply with the highest standards of audio professionals who expect unsurpassed audio performance in both live and studio applications.

Sugerencias o comentarios sobre este producto

Se entrega con una montura anti vibratoria, protector anti viento, estuche de cuero y manual de instrucciones.

Garantía Bax Music El periodo de garantía de este producto es de 2 años.

Opiniones

Ya no se puede escribir una opinión sobre este artículo
Aún no hay opiniones sobre este producto.

Vídeos

Productos similares de otras marcas

Buscar todos los productos en la categoría Micrófonos de condensador de membrana grande