basado en 3036 reseñas

Beyma WL5 1.4-inch Neodymium Waveguide Compression Driver (Set of 2)

aún no hay comentarios
Beyma WL5 1.4-inch Neodymium Waveguide Compression Driver (Set of 2)

No disponible

Este producto ya no puede adquirirse

Características

Características del producto

Diámetro tweeter
1.4 pulgadas
Sustainable product
Not specified
Sensibilidad
108 dB
Se incluye cono
Sí
Frecuencia máxima
20 - 20.9 kHz
Frecuencia mínima
500 - 999 Hz
Impedancia nominal
8 Ohm
RMS
50 - 99 W
Salida throat
35,6 mm
Tipo de imán
Neodymium

Peso y las dimensiones incluyen el paquete

Peso
6,7 kg
Dimensiones
35,0 x 35,0 x 20,0 cm

Características del producto

  • technical specifications:
    • throat diameter: 36mm / 1.4"
    • flange height: 125mm / 5"
    • nominal impedance: 8 Ohms
    • impedance: 7.2 ohm @ 3 khz
    • re: 5.5 Ohms
    • power capacity: 50W AES above 0.8kHz
    • program power capacity: 100W above 0.8kHz
    • sensitivity: 108dB 1W at 1M
    • frequency range: 600 - 20,000Hz
    • recommended crossover frequency: 800Hz or higher (12dB/oct. min.)
    • speaker coil diameter: 72.4mm, 2.85"
    • flux density: 2 T
    • BL factor: 11 N/A
    • diaphragm material: titanium
  • construction:
    • diameter: 123mm
    • depth: 271mm
    • mounting: four holes (7.5mm diameter)
    • total weight: 5,65 kg
    • magnet: neodymium

No se han encontrado alternativas

Características

Características del producto

Diámetro tweeter
1.4 pulgadas
Sustainable product
Not specified
Sensibilidad
108 dB
Se incluye cono
Sí
Frecuencia máxima
20 - 20.9 kHz
Frecuencia mínima
500 - 999 Hz
Impedancia nominal
8 Ohm
RMS
50 - 99 W
Salida throat
35,6 mm
Tipo de imán
Neodymium

Peso y las dimensiones incluyen el paquete

Peso
6,7 kg
Dimensiones
35,0 x 35,0 x 20,0 cm

Características del producto

  • technical specifications:
    • throat diameter: 36mm / 1.4"
    • flange height: 125mm / 5"
    • nominal impedance: 8 Ohms
    • impedance: 7.2 ohm @ 3 khz
    • re: 5.5 Ohms
    • power capacity: 50W AES above 0.8kHz
    • program power capacity: 100W above 0.8kHz
    • sensitivity: 108dB 1W at 1M
    • frequency range: 600 - 20,000Hz
    • recommended crossover frequency: 800Hz or higher (12dB/oct. min.)
    • speaker coil diameter: 72.4mm, 2.85"
    • flux density: 2 T
    • BL factor: 11 N/A
    • diaphragm material: titanium
  • construction:
    • diameter: 123mm
    • depth: 271mm
    • mounting: four holes (7.5mm diameter)
    • total weight: 5,65 kg
    • magnet: neodymium

Información del producto

nº de producto: 9000-0102-8539

General

The Beyma WL5 combines a 1.4" high-frequency compression driver with a wave-guide and 5-inch flange height, focussing on limiting disruptions to avoid any acoustic sacrifices. Ideal for line-array speakers, the WL5 features a Neodymium magnet and a lightweight, 2.85" voice-coil for a frequency range of 600 to 20,000 Hertz and a sensitivity of 108dB. In terms of power capacity, the Beyma WL5 offers an AES output of 50 Watts at 8 Ohms.

Garantía Bax Music El periodo de garantía de este producto es de 2 años.

Opiniones

Ya no se puede escribir una opinión sobre este artículo
Aún no hay opiniones sobre este producto.

Descargas