▾

JB systems LED Manager DMX controller

aún no hay comentarios

No disponible, este producto ya no puede adquirirse.

No se han encontrado alternativas

JB systems LED Manager
nº de producto: W-20190 Garantía Bax Music: El periodo de garantía de este producto es de 2 años.

General

This versatile power supply and controller is ideal for the JB Systems light snake and LED strips, among other things. It can be used in fixed as well as mobile installations, as operating the controller is a doddle once everything's properly set up and connected.

Various pre-programmed settings allow you to get started straight away with your LED fixtures, and the clear layout also makes the controller a viable option for people who don't have great lighting expertise - this is why it's particularly practical if you want to use the unit in a pub or club and let staff operate it.

The power supply provides 300 watts of power, giving you extensive options to operate your LED fixtures and strips. As the power is divided over two groups of 150 watts each, you can also run a power cable to another part of the venue. A built-in clock lets the controller turn on and off automatically at any desired moment.

Características

Peso y las dimensiones incluyen el paquete

Peso (incluyendo el paquete)	7,9 kg
Dimensiones (incluyendo el paquete)	35,0 x 22,5 x 14,0 cm

Características del producto

various stand-alone settings:
fixed colour mode: immediate access to 9 pre-programmed colours
static chase mode: 12 different colour chases with manual speed control
sound chase mode: 12 different colour chases with audio controls
spectrum mix: 32 different spectrum colours, including gorgeous colour changes
speed and dimming adjustable with faders
slow colour changes with adjustable fade time
Blackout and Full On functions
all functions can be directly accessed with the LED Manager or with optional
LEDCON-01
various LED managers can be used together in master/slave mode to achieve high power, fully synchronised setups
300W power: 2x 150W 24Vdc outputs (R+G+B) with protection against short-circuiting
built-in clock with battery backup and NiMH battery charger (batteries not included)
3 stand-alone programmable on/off timers (start/top 3 different colour chases at
3 different times!)
can be operated with any standard DMX controller!
4 DMX channels required: Ch1= red, Ch2= green, Ch3= blue, Ch4= dimmer/strobe
housing ready for easy installation against wall
fan cooling for additional reliability
mains voltage: AC 230 V, 50 Hz
fuse: 6.3A slow blow (20mm glass)
backup battery: 3x 1.2V AA-type NiMH rechargeable batteries (optional)
output voltage to LEDs: DC 24V common anode
output power to LEDs: 2x 150 W max. (Total = 300 W max.)
red: 2x 50 W max. (total = 100 W max.)
green: 2x 50 W max. (total = 100 W max.)
blue: 2x 50 W max. (total = 100 W max.)
DMX connectors: 3-pin XLR (DMX-512 standard)
DMX channels: 4 (CH1: red, CH2: green, CH3: blue, CH4: dimmer/strobe)
audio input: not present, via built-in microphone
dimensions: 330 x 202 x 106 cm
weight: 6.6 kg