DBX 234S crossover

PVP 290,00 € -7%

269,00 € incl. 21% IVA

Véase también (4)

Disponibilidad online

Pídelo ahora y recíbelo en menos de 3 semanas

añadir a la cesta

Comparar

Elija ahora 2 años de garantía adicional y más ventajas exclusivas!
Premio de 13,45 €

Packs de ahorro

DBX 234S + Innox RPD R8S-FS

PVP 306,00 €
Ahorra 5,00 €
Ahora juntos por 301,00 €

+ -

añadir a la cesta

DBX 234S + Innox INA SR8

PVP 343,00 €
Ahorra 9,00 €
Ahora juntos por 334,00 €

DBX 234S crossover
nº de producto: AXL-234S Garantía Bax Music: El periodo de garantía de este producto es de 2 años.

General

The secret to good sound sits in the crossover you choose. With the DBX 234S crossover, uncompromising high-performance is backed up by incredibly low noise, solid reliability and four decades of DBX knowledge and expertise. This takes the form of precision filters that carefully split the audio signal, before the corresponding frequencies are passed onto your speaker drivers. In the 234S, you really do have one of the world's finest processors on your side.

The 234S Does Exactly What You Expect, and More

This crossover only sends specific frequency ranges to each speaker, leaving your amplifiers free to use their full power for the usable signal. This means less distortion, and a brighter, undeniably better sound for the entire PA system. The DBX 234S is also a double-channel crossover, and provides all of the functionality you would only expect of a pro-grade unit, including Linkwitz-Riley 24 dB/octave filters and independent gain control for tweaking the levels.

Extraordinary Crossover Functionality

The DBX 234S has been gifted with a phase inversion for the output and a 40Hz low-cut filter. There's also the option to add the lower frequencies (subwoofer output) in mono. Every aspect of the design of this crossover has been completed with exacting precision, from the solid 'click' controls, to the high-quality TRS inputs and outputs.

Características

Características del producto

Salida de subwoofer	sí
Sustainable product	not specified
Limiter integrado	no
Compresor	no
Crossover estéreo	dos y tres vías
Conector de entrada	jack de 6,35 mm
Coenctor de salida	jack (6,3 mm)
Crossover-mono	cuatro vías

Peso y las dimensiones incluyen el paquete

Peso (incluyendo el paquete)	2,6 kg
Dimensiones (incluyendo el paquete)	48,3 x 17,5 x 4,5 cm

Características del producto

crossover
balanced TRS jack inputs and outputs
module switch for stereo 2/3-way or mono 4-way operation
low frequencies added (subwoofer) output
x10 range switch on both channels
40Hz high-pass (low-cut) filter on both channels
phase switch on all outputs
independent level controls on all outputs
24dB per octave, Linkwitz-Riley filters (the professional standard)
stereo/mono status LEDs
CSA NRTL/C approved
CE conformity
TRS jack inputs
input type: electronic balanced/unbalanced, RF filtered
input impedance: balanced > 50 kOhms, unbalanced > 25 kOhms
maximum input level: +22 dBu balanced or unbalanced
TRS jack outputs
output type: impedance balanced/unbalanced, RF filtered
maximum output level in dBu: > +21 dBu balanced/unbalanced at 2 kOhm or more
stereo mode crossover frequencies low/high: 45 to 960Hz or 450Hz to 9.6kHz (x10 setting)
stereo mode crossover frequencies low/mid: 45 to 960Hz or 450Hz to 9.6kHz (x10 setting)
stereo mode crossover frequencies mid/high: 450Hz to 9.6kHz (x10 setting)
mono mode crossover frequencies low/low-mid: 45 to 960Hz or 450Hz to 9.6kHz (x10 setting)
mono mode crossover frequencies low-mid/high-mid: 450Hz to 9.6kHz (x10 setting)
mono mode crossover frequencies high-mid/high: 450Hz to 9.6kHz (x10 setting)
filter type: Linkwitz-Riley, 24 dB/octave, variable status
low-cut on front panel: activates 40Hz Butterworth, 12dB/octabe high-pass filter
a low-cut switch per channel
phase shift: inverts the phase at the output, one switch per output
x10 on back panel: reduces the crossover frequency per 10
one x10 switch per channel
mode switch on back panel: selects stereo/mono and 2/3/4-way operation
LF sum on the back: selects normal (stereo) or mono low-frequency operation
indicator for stereo operation: green LED
indicator for mono operation: yellow LED
indicator for low-cut: red LED per channel
indicator for x10: green LED per channel
indicator for phase shit: red LED per output (3 per channel)
band width: 20Hz to 20kHz; +0/-0.5dB
frequency response: 3Hz to 90kHz, + 0/-3dB
dynamic range: >106dB, unweighed, each output
THD + self noise: 94dB (low output); > 93dB (mid output); > 90dB (high output)
mono mode: >94dB (low and low/mid output), >92dB (high/mid out), > 88dB (high output)
operating temperature: 0°C to 45°C (32°F to 113°F)
power consumption: 15 Watts
power supply: 100 VAC 50/60Hz; 120 VAC 60Hz; 230 VAC 50/60Hz
dimensions: 483 x 175 x 45mm
weight: 1.8 kg