▾

DAP Palladium P-400 Black Series amplificador PA

aún no hay comentarios

No disponible, este producto ya no puede adquirirse.

No se han encontrado alternativas

DAP Palladium P-400 Black Series amplificador PA
nº de producto: 9000-0004-1130 Garantía Bax Music: El periodo de garantía de este producto es de 2 años.

General

After having sold over 50,000 Palladium amplifiers, DAP Audio decided that it was high time to give this series a facelift. The result is the Black Series Palladium. This P-400 stereo PA amplifier is the smallest unit in the series when it comes to power. It has the same specifications as its vintage silver brother, but is black. The P-400 delivers 2x 100 watts of stereo power at 8 ohms and 2x 200 watts at 4 ohms. In bridged mode, if even offers 400 watts of power! This is more than enough for small fixed or mobile audio installations.

Characteristics of the DAP P-400 Black Series

All of this power needs to be managed in a reliable and safe way, of course. Which is why the P-400 amplifier is equipped with security mechanisms against, for instance, short-circuiting and overheating. When it comes to connectors, this unit is also highly complete. It has an XLR as well as TRS jack input per channel. For outputs, the P-400 lets you choose between high-quality lockable speaker connectors or the more traditional wire clamps. This way, you can easily connect nearly any speaker and other sound source.

The proven quality of the Palladium amplifier

Who is not familiar with the DAP Audio Palladium series? Many have grown up around them, many have started their musical career with them and are still working with them. Just like the silver-coloured Vintage Series, the Palladium Black Series consists of seven amplifiers, varying in power from 400 watts to a whopping 2,000 watts! They all have one thing in common: proven quality and an extremely attractive price.

Características

Características del producto

Formato rack 19	sí, 2 U
Compatibilidad 2 Ohm	no
Number of amplifier channels	2
Salida bucle de audio	no
Modo puente	sí
Conector de entrada	jack de 6,35 mm, XLR
Filtro	ninguno
Protecciones	sobrecarga, térmica, cortocircuito, voltaje DC, indicador clip
Procesador DSP	no
Refrigeración	ventilador
RMS power (4 ohms) per channel	200 - 249 watts
RMS power (at 8 Ohms) per channel	150 - 199 Watts
Tipo de ampli	AB
Salida de ampli	speakerconnector, pinza
Provisto de crossover	no

Peso y las dimensiones incluyen el paquete

Peso (incluyendo el paquete)	15,4 kg
Dimensiones (incluyendo el paquete)	60,0 x 60,0 x 20,0 cm

Características del producto

powerful stereo PA amplifier
colour: black
affordable and reliable
XLR and jack inputs
lockable speaker connectors and wire-clamp outputs
stereo mode: 2x 100W RMS at 8 ohms, 2x 200W RMS at 4 ohms
bridged mode: 400 watts RMS at 8 ohms
frequency range: 20 Hz to 20 kHz: +0.1 / -3 dB (1W / 8 ohms)
THD (4 ohms), 1 kHz < 0.05% at 200 watts
SMPER IMD < 0.01% at 100 watts (60 Hz and 7 kHz)
slew rate > 40V/ µS
damping factor: 300:1.1 kHz at 8 ohms
input CMRR (1 kHz) > 60 dB
voltage gain: 50 x standard
input sensitivity (8 ohms): 0.775V with average use
input impedance: 20 kOhm balanced, 10 kOhm unbalanced
noise: -103 dB
crosstalk < 60 dB
inputs per channel: 1x XLR female (pin 2 +), 1x TRS jack (tip +)
outputs per channel: 1x SpeakOn, 2x wire clamp (+ and -)
power supply: 230 volts / 50~ 60 Hz
maximum power consumption at 220 V: 5 A
cooling: two DC fans with variable speed
controls: front 2x volume control, read ground lift jumper
LED indicators per channel, protect, clip, signal, power
security: temperature, short-circuiting, DC voltage, subsonic, high frequency, on/off
dimensions: 483 x 400 x 89 mm (LxWxH)
weight: 18 kg