basado en 3036 reseñas

Alesis Strike Amp 8 2000 Watt Drum Amplifier

aún no hay comentarios
Alesis Strike Amp 8 2000 Watt Drum Amplifier

No disponible

Este producto ya no puede adquirirse

Características

Características del producto

Sustainable product
Not specified
Peso
6 - 10 kg
Salida auriculares
No
Conector de entrada
Jack estéreo de 6,35 mm, jack de 6,35 mm + XLR, XLR
Ecualizador integrado
Tipo de monitor
Solo altavoz
RMS
1500 - 3000 W
Coenctor de salida
XLR (3-pines)

Peso y las dimensiones incluyen el paquete

Peso
10,9 kg
Dimensiones
53,0 x 36,0 x 34,0 cm

Características del producto

  • drum amplifier
  • output power: 2,000 Watts
  • can be used as a tilt-back stage monitor and stand-mounted
  • drivers
    • 8" low-frequency driver
    • 1.4" high frequency driver
  • crossover frequency: 2.0 kHz
  • maximum SPL: 131dB (peak), 128dB (continuous)
  • frequency response: 53 Hz - 20 kHz (± 3dB)
  • frequency range: 46 Hz - 22 kHz (- 10dB)
  • horn coverage: 90° horizontal x 60° vertical (nominal)
  • equalisation: contour switch with low and high frequency +3dB boost
  • connectors:
    • 2x XLR/TRS 6.35mm combo inputs
    • 1x XLR link output
    • 1x IEC power cable input
  • controls
    • on/off switch
    • 2x volume control (1 per input)
    • EQ contour switch
    • ground-lift switch (prevents static noise)
  • Indicators
    • 2x power LEDs (one on the front, one on the back)
    • clip limiter LED
  • Protection
    • electronic clip
    • thermal and transducer overdrive
  • power consumption: 800W
  • dimensions: 434 x 256 x 245mm
  • weight: 9.2 kg

No se han encontrado alternativas

Características

Características del producto

Sustainable product
Not specified
Peso
6 - 10 kg
Salida auriculares
No
Conector de entrada
Jack estéreo de 6,35 mm, jack de 6,35 mm + XLR, XLR
Ecualizador integrado
Tipo de monitor
Solo altavoz
RMS
1500 - 3000 W
Coenctor de salida
XLR (3-pines)

Peso y las dimensiones incluyen el paquete

Peso
10,9 kg
Dimensiones
53,0 x 36,0 x 34,0 cm

Características del producto

  • drum amplifier
  • output power: 2,000 Watts
  • can be used as a tilt-back stage monitor and stand-mounted
  • drivers
    • 8" low-frequency driver
    • 1.4" high frequency driver
  • crossover frequency: 2.0 kHz
  • maximum SPL: 131dB (peak), 128dB (continuous)
  • frequency response: 53 Hz - 20 kHz (± 3dB)
  • frequency range: 46 Hz - 22 kHz (- 10dB)
  • horn coverage: 90° horizontal x 60° vertical (nominal)
  • equalisation: contour switch with low and high frequency +3dB boost
  • connectors:
    • 2x XLR/TRS 6.35mm combo inputs
    • 1x XLR link output
    • 1x IEC power cable input
  • controls
    • on/off switch
    • 2x volume control (1 per input)
    • EQ contour switch
    • ground-lift switch (prevents static noise)
  • Indicators
    • 2x power LEDs (one on the front, one on the back)
    • clip limiter LED
  • Protection
    • electronic clip
    • thermal and transducer overdrive
  • power consumption: 800W
  • dimensions: 434 x 256 x 245mm
  • weight: 9.2 kg

Información del producto

nº de producto: 9000-0068-6188

General

The benefits of playing an electronic kit are only getting better and better, and while the playing feel and creative potential of these kits improves, drum amplification needs to keep up. Unsurprisingly, the Alesis Strike Amp 8 is more than capable. This purpose-designed electronic drum kit amplifier comes housed in a tight, space-saving cabinet loaded with an 8" woofer. While a few inches smaller than its 12" comrade, this compact amp is just as potent.

The Alesis Strike Amp 8

Remarkably, just like the Strike Amp 12, the Amp 8 is able to push up to 2,000 Watts of power - more than enough for most gigs. Even at this level of output, the amplifier is able to shape the full and defined depth of kicks and toms and when you really push the volume, they deliver a satisfying punch to the gut. Higher-frequency sounds like the snare and cymbals are just as defined, balanced and clear, and even when you pull the volume way back, the clarity and definition is retained across the entire range.

Connections

Your module is simply hooked up to the Strike Amp 8 via a pair of XLR/TRS jack combo inputs either in stereo or two-part mono, where the volume can be set per side. This amp is also fully prepped for a dual-amp set-up since two Strike amps can be linked, and due to the cabinet construction, a single Strike can be set up and used as a personal tilt-back stage monitor - it can even be stand-mounted.

Garantía Bax Music El periodo de garantía de este producto es de 2 años.

Opiniones

Ya no se puede escribir una opinión sobre este artículo
Aún no hay opiniones sobre este producto.

Vídeos

Descargas