basado en 3036 reseñas

ENGL E810 Tube Poweramp amplificador final estéreo de válvulas 2x20W

No disponible, este producto ya no puede adquirirse.

No se han encontrado alternativas
ENGL E810 Tube Poweramp amplificador final estéreo de válvulas 2x20W
nº de producto: 9000-0009-0334 Garantía Bax Music: El periodo de garantía de este producto es de 2 años.

General

With the E810 Tube Poweramp, ENGL has the ideal solution for guitarists looking for a compact rack setup. It has 2x 20 Watts of power, driven by 2 EL84 tubes per channel. The E810 is just one 19-inch rack unit high, yet offers a surprisingly deep and powerful tube sound with all of the essential tone controls. The preamplifier can be used for input with the sound going to one or two 8 or 16-ohm cabinets.

ENGL E810 Tube Poweramp: Versatile Stereo Channels

The E810 has two channels, left and right. The volume can be adjusted per channel which is ideal for solo boosts, for instance. High and low tones can be further adjusted using the E810's separate controls for presence and depth. These are also included per channel so that you can set up two different tone channels to switch between.

Footswitch Functionality

If you're using a mono preamp, you can put one of the channels on standby using the double standby switches. On the back there is a ground-lift switch that prevents your rack from humming through ground loops next to an input for an optional ENGL Z-4 footswitch that you can switch between volume A/B and channel or sound-set A/B.

Características

Peso y las dimensiones incluyen el paquete

Peso (incluyendo el paquete) 12,5 kg
Dimensiones (incluyendo el paquete) 56,0 x 44,0 x 10,0 cm

Características del producto

  • ENGL E810 Tube Poweramp
  • stereo tube-power amp
  • 2 channels: left and right
  • tubes: 4x EL84, 3x 12AX7
  • power: 2x 20 Watts
  • lightweight and compact
  • suitable for a 19-inch rack (1U)
  • volume A/B per channel, ideal for 2 different volumes for solos etc.
  • input gain switch
  • ground lift switch to prevent ground loops in the rack
  • presence A/B per channel for controlling the high frequencies
  • depth A/B per channel for controlling the low frequencies
  • volume A/B and sound set A/B (presence A/B + depth A/B) also switchable via optional foot switch
  • silent buit-in cooling fan
  • speaker outputs: 8 and 16 Ohms per channel
  • LED indicators show when tubes need replacing
  • LED indicators show when signal is cut off due to high temperatures
Ya no se puede escribir una opinión sobre este artículo

Aún no hay opiniones sobre este producto.
Descripción Tipo Idioma Extensión
Handleiding. Manual Desconocido

Productos similares de otras marcas

Buscar todos los productos en la categoría Amplificadores de potencia